• Smeer-pomp-DDB10
  • Smering-Pomp-DDB10 - Multi-Punt Pomp
  • Smeer-pomp-DDB10-Smeer-inspuiting-Pomp

DDB-10 Multi Point Smering Pomp

Item #: 3077
Max. Werkdruk: : 100Bar
Elektriese motor: 380VAC, 0.37kW, 50 / 60Hz
Smeer Tank: 7L
Gewig: 38Kgs
Gebruik: Multi-Punt smeerpomp vir tot 10-vettertoevoerpoorte
Kenmerke:
- 1 ~ 10 Smering poorte beskikbaar
- Smeer tenk tot 7L, 0.37Kw, 380V elektriese motor
- Standaard installasie afmetings en langer dienslewe
Verwante Produk / Vervanging: Pomp Injector
DDB Pomp Tegniese Data: DDB Pomp PDF

kategorie:
  • Beskrywing
  • dimensies

Beskrywing

Smeer Pomp DDB-10

Smeerpomp DDB-10 is 'n meervoudige vetsinspuitpomp met 10-smeermiddelspuitpoorte, beskikbaar vir die sentrale smeermiddel van die smeermiddel in klein, enkel- of progressiewe toerusting. Die konstruksie van smeermiddelpomp is suierinspuitvoering met 10-vetterpoorte (Of minder kan dit verseël word as daar nie 'n paar hawens benodig word nie). Hierdie smeerpomp is gewoonlik verbind met blok-tipe verdelers om aan verskeie vereistes van smering te voldoen.

Die installasie van smeermiddelpomp DDB-10 is redelik maklik om net elke pompinjector met staal- of plastiekpype met die koppelstuk te verbind en dan elke vetvoertoevoer na verskillende smeervereistes te verdeel. Die vuilvervoerbuise sal deur klinknaels of bande vasgemaak word. Die DDB-10-pomp is beskikbaar vir die medium van penetrasie, nie minder nie as 265 (25, 150g) 1 / 10mm-vet (NLGI0 # ~ 2 #). Die aanbevole omgewingstemperatuur is beter tussen 0 ~ 40.

It is necessary to clean the injector of lubrication pump and inlet port of grease lubrication system before filling grease in the grease reservoir, following the procedures to fill grease in DDB-10 pump and test the motor rotation of lubrication pump and each junction points after the completion of connection between lubrication pump and lubrication system or divider valves. The DDB-10 pump has been proved that multi-point lubrication pump can improve the work efficiency 5-time above if comparing with conventional lubrication methods, saving 2/3 lubricants, reduce maintenance costs about three times, extending service life of wear-out parts, the lubrication pump has characteristics of simple construct, easy to operate and installation, safe working, clean and other characteristics of lubricating oil and no special requirements for routine lubrication maintenance provides an effective way to work , but also for the efficient, fast, energy-efficient and safe for production and construction environment.

Beskrywing van smeersmeerpomp:

Smeer-Smering-pomp-DDB18-konstruk
Smeerpomp Deel Lys:

1. Elektriese motor ; 2. Innerwurm; 3. Ratwurm as; 4-5-6. ratte; 7. Eksentriese skag; 8. Verbindingspennetjie; 9. Gedrewe skyf; 10.Inner suier; 11. Smeerplaat; 12. Smeer roerstang


Smeerpomp DDB-10 Tegniese Data:

Max. drukVoedingspunteSiston StrokeStroke Adjustablevoeding Deel
10Mpa1010mm5mm0-0.2 ml / tyd
voertydtank DeelMotorgewig
13 tyd / min7L0.37Kw, 1380r / min, 380V38Kgs 1232


Smeerpomp DDB-10 Afmetings:

Smeer-pomp-DDB-10-dimensies

Note Of Grease Pump DDB-10 Before Operation:

  1. The multi-point lubrication grease pump DDB-10 should be installed in a place where the ambient temperature is suitable for working operation and small dust, which is convenient for oil or grease filling, adjustment, inspection and maintenance.
  2. The HL-20 gear oil must be added to the gear box to the oil level specified level.
  3. To add grease to pump reservoir the of the DDB-10 grease pump, the SJB-D60 manual fuel pump or the DJB-200 electric grease filling pump must be used to fill the grease to the pump reservoir of the DDB-10 grease pump. It is strictly forbidden to start the motor when there is no grease or oil in the reservoir.
  4. According to the arrow direction of rotation on the cover of the electric motor, the motor should be connected with stable wire and not reversed.
  5. The accuracy of the filter screen is not less than 0.2mm and should be cleaned regularly.
  6. The grease pump DDB-10 should be kept clean at all times. It is strictly forbidden to remove the reservoir cover, to prevent dirt from entering the pump chamber and affecting normal work.
Smeerpomp DDB-10 Afmetings:Smeer-pomp-DDB-10-dimensies
fout:
GTranslate Your license is inactive or expired, please subscribe again!